Details
OBL36/09-46A
Item No. 2366
Specification Voltage range( V ) 10-16cells / 3-4x Li-poly
RPM per volt(RPM/Volt) 910RPM/V
Dimensions ψx L(mm/in) 36x53.7 / 1.42x2.14
Shaft Diameter ψ(mm/in) 5/ 0.197
Max.efficiency current(A) 20-45A
Current capacity(A/s ) 50A/60s
Internal resistance(mΩ) 19mΩ
Recommend Propeller 11x8 / 12x6 / 12x8 / 13x6.5
Weight(g/oz) 200/7.05
KV Rating (PRM/Volt)
Max. Surge Current(A/s)
Content
1) Ripper 36 outrunner brushless motor x 1
2) Mounting Plate x 1
3) Prop adaptor x 1
4) Prop Nut x 1
5) Accessory Package x 1
6) L Type hex wrench x 2 (1.5 & 2mm)
7) Instruction Manual x 1
Introduction
The Thunder Tiger Ripper 36 series motors are designed for large-scale models, pattern, 3D planes and more. For use with airplanes from 20oz to 60oz. Each and every motor is designed for use with 2 to 5 cell (serial) lithium polymer batteries. Built on a 14-pole out runner configuration to provide extreme torque, while providing maximum efficiency. All motors feature prop adapters, mounting hardware, and aluminum propeller nut.
Features
1) The perfect current capacity for long time flying 2) Provides extremely high torque for flying 3) The most efficiently RPM value 4) The maximum efficiency current 5) The best mechanical design for cooling motor 6) Light weight with the best performance 7) The most completed package without any other purchases
Additional Information
Manufacturer | Thunder Tiger |
---|---|
Package Weight | 1.0000 |