EB-4 s3 Pro buggy car

Product code: TT 6230K20

Thunder Tiger

Quick Overview

 Innovative engineering enabled the low center of gravity. Combine with high performance suspension to create transition on any track. Along with the help of a manual with computer generated drawings and helpful pro tips; you will have no problem assembling this masterpiece


Availability: Out of stock

EB-4 s3 Pro buggy car

More Views


The new EB-4 S3 buggy car is the culminating result from extensive engineering and tremendous research and development by the Thunder Tiger Design Team.
 Length: 496mm / 19.5 in.
 Width: 305mm / 12 in.
 Height: 180mm / 7.08 in.
 Wheelbase: 320mm ~ 330mm
 FR/RR Track: 295mm ~ 305mm/300mm
 Weight: 3340 g. / 7.4 lbs.

Introducing features such as an extruded chassis; the most rigid ever, shocks that are placed in between the upper arms; keeping the shocks away from front damage in case of crash, single fiber discs at the front and rear of the center differential, oversized shock shafts match the current 3.5mm-thick shafts used on the best buggies in the market. Achieving the super low center of gravity, and a new radical engineering of a car construction. Features

* A7075-T6 front/rear shock tower and steering slider
* Front A-arm with adjustable Pillow-Ball suspension
* AB (Anti-Bumping) shocks with 3.5mm shafts provide various damping and rebounding
* Ultra long, light weight suspension arms
* Small transmission bulkheads with gasket
* Front shocks are protected behind the shock tower and mounted through the upper A-arm
* Graphite front brace, radio tray and center diff top plate
* Unique Delta-Box machined hardened chassis provides more rigidity than a conventional stamped chassis
* Heavy duty CVD universal drive trains (Front/Center/Rear)
* Enclosed radio box protects receiver and batteries from any foreign elements
* Laid down steering servo for low center of gravity
* Complete set of rubber-sealed ball bearings
* Fully adjustable Toe, Caster and Ackerman
* Captured hinge pins no E CLIPS needed,also prevents binding of suspension components

  Accessories Needed

* Radio Set - 2 Channel radio, x2 High Torque servos, Receiver and battery pack.
* Engine - .21 rear exhaust engine, Glow Fuel (20%), Glow starter, Air filter oil.
* Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Threat locking glue.
* Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers,
  Wire cutter, Needle nose pliers, Lexan cutter/Scissors, Silicon oil.



Additional Information

Manufacturer Thunder Tiger
Package Weight 9.0000

The Part Is also Compatible with :


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Memory usage: real: 38797312, emalloc: 37990000
Code ProfilerTimeCntEmallocRealMem